Cactus Tactical

JP Rifles / Viking Tactics Modular Handguard

JP Rifles / Viking Tactics Modular Handguard for AR-15 Rifles

The VTAC modular hand guard is designed as a complete system to improve not only the accuracy but the handling characteristics and utility of the rifle. The floating studs included allow complete flexibility in bipod positioning, whether all the way out for maximum stability or all the way in next to the receiver for fastest possible target indexing. Extra studs allow for proper tactical sling setup as well.

Two-piece design makes for an easy installation with a standard armorers wrench with proper torque as opposed to a strap wrench on one-piece tubes. Theres no need to drill unsightly holes for studs that may not align after disassembly/reassembly of the tube system. All accessories can be quickly relocated at will. The radical tapered nut and superb metal finishing make this the finest tube on the market. The ventilated, fluted design is also 20% lighter than standard tubes and also makes this the coolest running tube in terms of heat dissipation. Posigrip center portion assures non-slip grip regardless of weather conditions.

Specifications:

JP/VTac Modular Hand Guard System for M15 type rifle with rifle length gas system.
1.75 inches Inside Diameter, 2.00 inches Outside Diameter, 12.500 inches Overall Length
Weight: 15 ounces
All matte black finish.

Viking Tactics Quick Release Extension

Viking Tactics Quick Release Extension

Viking Tactics offers another sling attachment option for the VTAC sling line: the Viking Tactics Quick Release Extension.

The VTAC Quick Release Extension will allow the weapon to fully separate from the shooter without any further action.

Available in Black.

Viking Tactics Lamb Universal Sling Attachment

The Viking Tactics LUSA ( Lamb Universal Sling Attachment) allows the shooter to select from four different attaching options.

With the VTAC - LUSA you can use a quick detach sling swivel, a conventional sling swivel, a hook, or simply run the sling through the sling loop. The VTAC-LUSA allows a wide variety of options without changing hardware. For armorers the VTAC-LUSA eliminates the need to stock four different sling attachment brackets. For shooters that use the quick detach sling swivel, the VTAC-LUSA is designed to lock in the swivel and limit rotation to 45 degrees.

Viking Tactics Light Mount

The Viking Tactics Light Mount was designed to give the shooter a light-weight, versatile option to mount a light on any Picatinny or Weaver rail system. This mount will allow you to mount any light with a 1 inch or slightly larger diameter. Even the inexpensive Surefire G2 Nitrolon will fit. The Viking Tactics Light Mount provides you a variety of mounting preferences. You can mount your light so that it is out of your field of view and activated by using a tape switch. You also may mount the light in such a manner allowing you to use the push button on the back of the light for activation. (Note: flashlights and firearms not included, must be purchased separately)

The Viking Tactics Light Mount is made of a Modified Acrylic PVC Alloy Thermoplastic with high impact and abrasion resistant qualities. Impervious to most chemicals, solvents and oils, these highly advanced thermoplastics will not shrink and are proved to withstand the harshest environments.

Viking Tactics Butt Stock Attachment

Viking Tactics Butt Stock Adapter

The use of this butt stock adapter will enable you to install the Viking Tactics sling and padded wide sling on any AR-15, Mini 14, shotgun, or other full stock weapon.

Currently available in black and foliage green.

Viking Tactics Wide Padded Sling

Viking Tactics Wide Padded Sling

This sling is made for collapsible stock (AR-15 type rifles) and is quick, versatile, dynamic and most importantly simple! The VTAC padded sling is instantly adjustable to improve your shooting position, allows shooting from weak side shoulder, secures the carbine during handgun transitions, and allows hands-free movement in difficult surroundings. Unlike most slings, the Viking Tactics padded slings are fully adjustable while in use. You will not have to take a break from the action to adjust your sling. The Viking Tactics padded sling is not just a carry strap, the full range of adjustability will enhance retention when you need your hands free, it is also one of the only tactical slings that can be used as an adjustable shooting sling. A tight sling will enhance any shooting position. This sling provides added comfort for heavier firearms. Has the same great features as the original V-Tac sling. The Viking Tactics, Inc. Wide (padded) Sling was developed after listening to feedback from their customers.

Customers with heavier firearms who wanted a wider, more comfortable sling with the same great features of the original Viking Tactics, Inc. sling. The Viking Tactics Wide Sling is made with a shoulder strap with closed cell foam for increased comfort.

The forward adjustable portion of the sling remains the same as the original sling, giving you quick, easy adjustments from any position.

If this sling is used with a full stock AR-15, the Viking Tactics Butt Stock Attachment is needed.

Currently available in black and foliage green.

Viking Tactics Sling

Viking Tactics Sling

This sling is made for collapsible stock (AR-15 type rifles) and is quick, versatile, dynamic and most importantly simple!

The VTAC sling is instantly adjustable to improve your shooting position, allows shooting from weak side shoulder, secures the carbine during handgun transitions, and allows hands-free movement in difficult surroundings. Unlike most slings, the Viking Tactics slings are fully adjustable while in use. You will not have to take a break from the action to adjust your sling.

The Viking Tactics sling is not just a carry strap, the full range of adjustability will enhance retention when you need your hands free, it is also one of the only tactical slings that can be used as an adjustable shooting sling. A tight sling will enhance any shooting position.

If this sling is used with a full stock AR-15, the Viking Tactics Butt Stock Attachment is needed.

Currently available in black and foliage green.

BlackHawk Military M16 / M4 / AR-15 Magazine Pouch

This iBlackhawk Magazine Pouch is a military style M-16 Pouch with both the BTS attachment system and ALICE clips to fit up to 2 1/4 inch military pistol belts. Blackhawk has replaced the old pinch clips with an adjustable side release buckle for maximum pouch usage for items other than 3 M-16 or 2 M-14 magazines. The back and front are lined for durability and maintaining shape when empty.

Standard capacity: 3 M16 / AR-15 30 round or 2 M14 20 round magazines.

Also fits tripods, MRE's, etc...Made with Blackhawk's 1000D Nytaneon. (A.L.I.C.E. clips are not included)

Nordic Components Winchester SX2 / SX3 +1 Magazine Extensions

Nordic Components - +1 extended magazine tubes for Winchester SX2 and SX3 shotguns

These are the finest machined shotshell tube extensions currently available. Each tube has a unique swirl style barrel nut (image on left) adding a distinctive touch while also providing a quick and sure grip.

Currently available in +1 configuration for the Winchester SX2 and SX3 shotguns. Shell capacity is defined by Nordic as the shell increase above the standard capacity provided by the fixed magazine tube (tube inside the forearm). If your shotgun currently has a short tube extension that extends past the fixed magazine tube, the round capacity of that extension would be lost as it is removed and replaced. Magazine tube length is the length of the tube and nut.

An extended spring is included with the magazine extension tube.

Followers, clamp, clamp rail and speed bolt handle in the image below are for display purposes only and are not included with the magazine extension. These items can be purchased separately.

Nordic Components Benelli M1 / M2 /SBE +1 Magazine Extensions

Nordic Components - +1 extended magazine tubes for Benelli shotguns

These are the finest machined shotshell tube extensions currently available. Each tube has a unique swirl style barrel nut (image on left) adding a distinctive touch while also providing a quick and sure grip.

Currently available in +1 configuration for the Benelli M1, M2, SBE and SBE2 shotguns. Shell capacity is defined by Nordic as the shell increase above the standard capacity provided by the fixed magazine tube (tube inside the forearm). If your shotgun currently has a short tube extension that extends past the fixed magazine tube, the round capacity of that extension would be lost as it is removed and replaced. Magazine tube length is the length of the tube and nut.

An extended spring is included with the magazine extension tube.

Followers, clamp, clamp rail and speed bolt handle in the image below are for display purposes only and are not included with the magazine extension. These items can be purchased separately.

The Special Ops Workout: The Elite Exercise Program Inspired by the United States Special Operations Command

The Special Ops Workout: The Elite Exercise Program Inspired by the United States Special Operations Command
by Mike Mejia

Due to recent events, all eyes have been on the American military, especially the elite Special Operations teams: Army Special Forces, Army Rangers, Navy SEALS, and Air Force Special Ops that truly are the best of the best in the military. These teams of specially trained warriors perform the most difficult, politically sensitive, and dangerous missions known to the US military.

The Special Ops Workout: The Elite Exercise Program Inspired by the United States Special Operations Command gives an inside look at the intense physical preparation required to become part of one of these elite teams. The men of the Special Ops are in the best physical shape of their lives, and the combination of conditioning workouts, nutritional information, and inside looks into training and selection guidelines outlined in The Special Ops Workout show just how they get that way.

Nationally known fitness expert Mike Mejia and former US Navy SEAL and fitness author Stewart Smith teamed up to give an insider's look into some of the toughest military training in the world. By focusing on the strength and endurance conditioning essential to success in Special Operations teams, these experts show how to use real Special Ops workouts to get in the best physical shape of your life. Whether your goal is to make it into the Special Forces, or just bring extra intensity into your regular workout routine, The Special Ops Workout is a resource that will add a powerful boost to any fitness regimen.

The Special Ops Workout features:

A specially formulated 12-week total body conditioning workout.
The Army Ranger and Green Beret 6-week workout.
The Air Force PJ/CCT 6-week workout.
The Navy SEAL 6-week workout.
The ultimate in high-powered nutrition info.
An insider's view of Special Ops training with our exclusive Real Deal insider tips.

About the Author
Mike Mejia, CSCS is one of the top exercise writers in the country. A fitness and conditioning expert, Mike regularly contributes to Men's Health magazine. Stew Smith, USN (SEAL) is an expert on military fitness. As author of the best-selling book The Complete Guide to Navy SEAL Fitness, his workouts have prepared many men for Special Ops Training.

Paperback: 240 pages
Publisher: Hatherleigh Press (September 2003)
Language: English
ISBN-10: 1578261325
ISBN-13: 978-1578261321
Product Dimensions: 9 x 7 x 0.5 inches

On Combat: The Psychology and Physiology of Deadly Conflict in War and in Peace

On Combat: The Psychology and Physiology of Deadly Conflict in War and in Peace
by Dave Grossman

On Combat looks at what happens to the human body under the stresses of deadly battle the impact on the nervous system, heart, breathing, visual and auditory perception, memory - then discusses new research findings as to what measures warriors can take to prevent such debilitations so they can stay in the fight, survive, and win. A brief, but insightful look at history shows the evolution of combat, the development of the physical and psychological leverage that enables humans to kill other humans, followed by an objective examination of domestic violence in America. The authors reveal the nature of the warrior, brave men and women who train their minds and bodies to go to that place from which others flee. After examining the incredible impact of a few true warriors in battle, On Combat presents new and exciting research as to how to train the mind to become inoculated to stress, fear and even pain. Expanding on Lt. Col. Grossman s popular "Bulletproof mind" presentation, the book explores what really happens to the warrior after the battle, and shows how emotions, such as relief and self-blame, are natural and healthy ways to feel about having survived combat. A fresh and highly informative look at post traumatic stress syndrome (PTSD) details how to prevent it, how to survive it should it happen, how to come out of it stronger, and how to help others who are experiencing it. On Combat looks at the critical importance of the debriefing, when warriors gather after the battle to share what happened, critique, learn from each other and, for some, begin to heal from the horror. The reader will learn a highly effective breathing technique that not only steadies the warrior s mind and body before and during the battle, but can also be used afterwards as a powerful healing device to help separate the emotion from the memory. Concluding chapters discuss the Christian/Judeo view of killing in combat and offers powerful insight that Lt. Col. Grossman has imparted over the years to help thousands of warriors understand and come to terms with their actions in battle. A final chapter encourages warriors to always fight for justice, not vengeance, so that their remaining days will be healthy ones filled with pride for having performed their duty morally and ethically. This information-packed book ploughs new ground in its vision, in its extensive new research and startling findings, and in its powerful, revealing quotes and anecdotes from top people in the warrior community, people who have faced the toxic environment of deadly combat and now share their wisdom to help others. On Combat is easy to read and powerful in scope. It is a true classic that will be read by new and veteran warriors for years to come.

About the Author Lt. Col. Dave Grossman is an internationally recognized scholar, author, soldier, and speaker who is one of the world s foremost experts in the field of human aggression and the roots of violence and violent crime. Col. Grossman is a West Point psychology professor, Professor of Military Science, and an Army Ranger who specializes in the study of combat human factors. In this new field Col. Grossman has made revolutionary new contributions to our understanding of killing in war, the psychological costs of war, the root causes of the current "virus" of violent crime that is raging around the world, and the process of healing the victims of violence, in war and peace. He is the author of On Killing, which was nominated for a Pulitzer Prize; has been translated into Japanese, Korean, and German; is on the US Marine Corps recommended reading list; and is required reading at the FBI academy and numerous other academies and colleges. Col. Grossman co-authored Stop Teaching Our Kids to Kill: A Call to Action Against TV, Movie and Video Game Violence, which has been translated into Norwegian and German, and has received international acclaim. Col. Grossman s most recent book is On Combat, the highly acclaimed sequel to On Killing.

Paperback: 403 pages
Publisher: PPCT Research Publications (August 2007)
Language: English
ISBN-10: 0964920522
ISBN-13: 978-0964920521
Product Dimensions: 8 x 5.5 x 1 inches

Tactical Pistol Shooting

Tactical Pistol Shooting
by Erik Lawrence

The essential reference for the beginning shooter, Tactical Pistol Shooting provides a thorough introduction to the use of tactical pistols. Readers get instruction on defense mindsets, pistol terms, shooting fundamentals and shooting positions, with emphasis on important safety precautions and lawful personal defense.

The book then instructs on more advanced techniques, training drills and complicated shooting environments. More than 250 detailed, step-by-step photos clearly illustrate the techniques shooters will master to become more adept with a tactical pistol. Appendixes include a discussion of shooting standards, equipment supplies listings, progress worksheets and more.

-Provides beginners a thorough introduction to the use of semiautomatic pistols -Offers techniques for more advanced skills -More than 250 step-by-step photos illustrate techniques.

Paperback: 216 pages
Publisher: Krause Publications (July 2005)
Language: English
ISBN-10: 0896891755
ISBN-13: 978-0896891753
Product Dimensions: 8.8 x 6 x 0.5 inches

The Book of Two Guns: The Martial Art of the 1911 Pistol and AR Carbine

The Book of Two Guns: The Martial Art of the 1911 Pistol and AR Carbine
by Tiger McKee

The Book of Two Guns is a reference of principles and techniques for fighting with firearms, specifically the 1911 pistol and AR carbine.

New shooter and veteran alike will find a wealth of information, and numerous tools for their tactical toolbox. You will also see references to combat mindset, and its value in training and actual encounters. So learn, enjoy, and most of all.stay in the fight!

About the Author
Tiger McKee draws from a wide range of experience in order to compile The Book of Two Guns. The information he shares with the readers is not only proven but practiced everyday by students of his trade. Tiger also brings together the concept of fighting with a firearm as many view fighting with the hand. Mental and emotional dedication are a must; going hand in hand with the skills illustrated in this book. Overall, a very strong book for beginners and for the experienced a refreshing look at some of the basics.

Paperback: 176 pages
Publisher: BookSurge Publishing, Janaury 2005
Language: English
ISBN-10: 1419601806
ISBN-13: 978-1419601804
Product Dimensions: 9.9 x 7.2 x 0.5 inches

Green Eyes and Black Rifles: Warriors Guide to the Combat Carbine

Green Eyes and Black Rifles: Warriors Guide to the Combat Carbine
by Ret. SGM Kyle E. Lamb

From Mogadishu to Mosul Drawing on combat experience from Mogadishu, Somalia to Mosul, Iraq, Retired SGM Kyle E. Lamb passes on lessons learned to fellow Warriors.

Green Eyes and Black Rifles: The Warriors Guide to the Combat Carbine is intended to enhance your shooting skills, and refine the tactical employment of your combat carbine.

New shooter and veteran alike will find a wealth of information, and numerous tools for their tactical toolbox. You will also see references to combat mindset, and its value in training and actual encounters. So learn, enjoy, and most of all.stay in the fight!

About the Author
Viking Tactics, Inc. brings you battle proven tactics and weapon handling techniques. Our instructors continue the evolution in gunfighting, with extremely aggressive, no nonsense threat assessment and elimination skills. All Viking Tactics, Inc. Primary Instructors have Special Operations backgrounds as well as extensive real world experience.

Viking Tactics, Inc. also offers a large selection of high quality tactical gear to help you outfit you or your team. We are the home to the annual North American Tactical 3-Gun Championship and the Viking Tactics Sling.

Paperback: 219 pages
Publisher: Trample & Hurdle Publishers, Janaury 2008
Language: English
ISBN-10: 0615166547
ISBN-13: 978-0615166544
Product Dimensions: 11 x 8.4 x 0.4 inches

AR-15 Carbine Gas System

Critical Replacement Parts To Keep Your AR-15 Functioning

The essential parts you need to repair and maintain your M4 or Carbine gas system. Ideal for emergency repairs, or use to build a new rifle. The kit includes gas tube and roll pin, bolt carrier key and screws plus three gas rings.

SPECS: Stainless steel gas tube rings. Remaining parts are made of steel, black, matte finish.

BlackHawk Tactical Modular Platform

CQC and S.T.R.I.K.E. Compatible Platform

Constructed of high density polymer, this versatile drop leg platform is designed to hold four of the CQC accessory carriers for lights, magazines, etc. It is also S.T.R.I.K.E./MOLLE compatible so it will work with a number of the Blackhawk S.T.R.I.K.E. pouches. It uses the Y configuration hanger system for maximum comfort and flexibility. Also works with all Blackhawk LE Duty Gear accessories except the Double Mag Pouch.

Features:

Unique Y-harness configuration with heavy duty hanger straps and quick release swivels to detach from belt for convenience and comfort

Dual leg strap design can be used with both or just the bottom strap

Four Accessory rails for CQC magazines or light carriers adjustable for height and orientation

Flexible platform conform to the shape of any leg.

Once again, BlackHawk CQC products gives you choices, not limits.

Cavalry Arms Tourniquet

The Cavalry Arms Tourniquet is a portable constriction or compression device used to control venous and arterial circulation to an extremity for a period of time. Use of the tourniquet will apply pressure circumferentially upon the skin and underlying tissues of a limb; this pressure is transferred to the walls of vessels, causing them to become temporarily occluded.

In English, this tourniquet is used to stop bleeding until medical aid can be rendered. Great for your trunk emergency kit or home bag.

DS ARMS AR-15 Stripped Lower Receiver

DS Arms ZM4 AR15 Stripped Forged Lower Receiver

This Stripped Lower Receiver is forged from T6 Aircraft Aluminum Alloy and has a hardcoat anodized finish. Does not include any internal or external parts. Receiver uses current standard .250 inch pivot pin and a small pin .154 inch trigger.

Due to Federal firearms regulations, a Form 4473 or transfer to a receiving FFL is required for the purchase of this receiver. If you are unsure of the procedure, please click here for more information.

Nordic Components Winchester SX2 / SX3 and FNH SLP Speed Bolt Handle

Nordic Components - Speed Bolt Handles for Winchester SX2 / SX3 and FNH SLP 12 gauge shotguns

These are the finest machined speed bolt handles currently available. Each handle has a unique swirl style adding a distinct touch while also providing a quick and sure grip.

Currently available for the Winchester SX2 / SX3 and FNH SLP 12 gauge shotguns. This bolt handle does not require gunsmith fitting and is easily installeable by the end user. Please refer to the factory maintenance manual which came with your shotgun for full instructions.

Magpul MOE Stock, Black - Commercial

The Magpul Original Equipment (MOE) is a line of high quality, inexpensive gun accessories that are simple, durable upgrades to standard Mil-Spec components.

The MOE carbine stock combines great quality with an economical price, and is a drop-in upgrade for a standard M4-style collapsible stock. The stock makes use of a strong, A-frame design, has a streamlined appearance and protected operating lever. Reinforced polymer construction.

For use with commercial diameter buffer tubes only.

S&W M&P Knife, Assisted Opener, Scoop Back Black Blade

Smith & Wesson M.A.G.I.C. Knife - partially serrated edge tanto blade with a black Teflon coating. A very well built knife that powerfully snaps open! Opens easily with the thumbstud or black button on top. The aluminum handles have a nice feel in hand.

Features:

Brand new in box - manufacturer direct
Closed length: 4.25"
Blade length: 2.9"
PARTIALLY SERRATED edge stainless scope back TANTO blade with a black Teflon coating
Ambidextrous thumb studs
Assisted opening blade
T6061 aircraft aluminum handles.

Glock Factory Magazine Extension, 9mm / 40 SW/ 357

Glock Factory Magazine Plus Two Extension.

Now you can increase the capacity of your Glock 9mm & .40 magazines by replacing the original base pad with this extended model. Installs easily. Supplies are limited on these hard-to-find pads so get em while you can.

Adds two extra rounds to your Glock magazine. For Glock 9MM, Glock 40 S&W, and Glock 357SIG magazines. Glock part number 07151.

Magpul MOE Stock, Black - Mil Spec

Yankee Hill Machine Swivel Stud

This Yankee Hill Machine Swivel Stud attaches to a variety of forearms and allows the use of a 1-1/4 inch QD Sling Swivel.

Some forearms have a pre existing threaded hole in which this swivel stud will fit, other forearms will require modification for use.

Harris #5 Adapter for AR-15

The Harris #5 adapterfits AR-15's with the standard round handguard and can be used without any alterations.
This adapter is also the one to use for custom AR-15 installations. You can drill a hole in the wood or plastic fore-end of any rifle (with sufficient strength) and put the backing plate on the inside, the stud on the outside, allowing you to use any Harris bipod and or sling combination.

Swivel included.

Magpul MOE Grip, Black

The Magpul Original Equipment (MOE) AR-15 pistol grip improves comfort for better weapon handling and control.

The new Magpul Original Equipment (MOE) pistol grip gives the shooter a more comfortable, secure grasp than the standard, A2-style grip for better trigger control and recoil management with less fatigue.

It improves weapon handling during precisely aimed shots as well as sustained semi- or full-auto fire.
Rigid, fully supported one-piece construction from reinforced, high-impact polymer, with crackle texture on the sides and deep horizontal grooves on frontstrap and backstrap to keep your hand firmly in place, even when wet.
Curved beavertail fills the grip-to-receiver junction to help you maintain a comfortable hold and protect the web of you hand during sustained firing.
Removable grip cap provides access to a roomy internal storage compartment for spare batteries, cleaning supplies, small bottle of oil, or even a spare bolt.

Compatible with Magpul MIAD Grip Cores and Enhanced Aluminum Triggerguard, available separately. Drop-in installation in minutes with included mounting hardware and instructions.

Yankee Hill Machine EoTech Riser

The Yankee HIll Machine EoTech Riser has been newly redesigned for increased accuracy and improved clamping power! This mount elevates your EOTech .300 inches allowing you to clearly look through the center of the Eotech and still use your iron sights in the lower third of the Eotech window.

Made from aircraft quality aluminum and hardcoated to military specifications.

Elcan SpecterDR 1 - 4 Optical Sight

The SpecterDR 1 - 4x Optical Sight is recognized as the world's most advanced combat optical rifle sight. Effectively two rifle sights in one, the SpecterDR can be switched instantly from a 4x long-range sight to a 1x wide field-of-view CQB sight. Unlike sights with zoom mechanisms, both the eye relief and the optical design remain optimal.

The battery-powered LED illumination system has two ranges: one that illuminated the entire crosshair for long range low light use, and another that illuminates just a red dot in the center for CQB applications. Zeroing functions are incorporated in the integral mount and the sight attaches to Mil-Std-1913 'Picatinny' receivers with ARMS Levers. The reticle is ballistically compensated for 5.56 NATO. Comes with one-year warranty.

Click for the Specification sheet for the Elcan Spectre DR Scope

Specifications:

Weight (g): 580

Size (mm): 153 x 74 x 78

Eye Relief (mm): 70

Field of View @ 100yds (ft): 146.3 - 34.2

Exit Pupil (mm): 8

Features:

Fixed Focus Range (m): 20 to infinity

Battery Type: DL 1/3N (3v Lithium)

Battery Life: 600 hours minimum, 3000 hours average

Ballistic Calibration: 100m - 600m for 5.56 carbine, 700 - 1000m for 5.56 LMG

Adjustment Resolution: 0.5 MOA

Adjustment Range: 120 MOA

Base Requirement: Mil-Std-1913 'Picatinny Rail'

Attachment: Mil-Std-1913 'Picatinny Rail'

Galati Shotgun Shell Belt

The Galati Shotgun Shell Belt has a quick detachable buckle and quality elastic keepers to securely hold your shotgun shells. The shells will not shake loose while walking or shooting.

The small shotgun belt holds 25 rounds and fits waists from 36 - 41 inches.
The medium shotgun belt holds 35 rounds and fits waits from 45 - 52 inches.

Valdada 4 x 24 M2 Rifle Scope, .308 Cam

The Valdada M Series of scopes are true BDC style optics. The M1 scope has the elevation knob calibrated for the .308 168gr BTHP @ 2700 fps trajectory, from 100-1000m. Lightweight and compact, this scope is regarded as one of the most rugged tactical scopes ever made. Tested on battlefields worldwide for over 35 years, its optical performance, precision mechanics and flawless reliability were proven many times over.

Product Description:

The 4x24 M1 Tactical scope is the Valdada sporting version of the proven military PSO design, for use on a variety of rifles, and it is available with a cam for .308 Win. Its 30mm tube readily accepts any standard 30mm rings, Piccatiny, Stanag or Weaver-style for attachment to virtually any common mount. The reticle features a battery-powered illumination system with 7 intensity settings for use under a variety of low-light situations. Uses a common 3v CR2032 cell which is supplied. The scope features the European fast focus ocular design, with 3 inch protective rubber eyecup (removable to be replaced by flip-up caps if desired).

Its features include:

Glass rangefinding reticule
6061 T6 Dural alloy housing, "O" ring sealed and nitrogen filled
30mm tube diameter
Finger-adjustable knobs
Bullet drop compensated cam from 100 to 1000 meters for the .308 168gr BTHP bullet @ 2700 fps trajectory
Waterproof - Fogproof - Shockproof
Superior optical glass by Schott Glasswerk, Germany
Battery powered illumination system with 7 intensity settings
MC-7 Fully multicoating technology with anti-reflex layers, eliminating glare and maximizing light transmission
Reticle Choices: Dot Ranging or CQB Tactical Reticle

Technical Data:

Magnification - 4x
Objective diameter - 24mm
Field of view at 100 yards - 32 feet
Exit pupil diameter - 6mm
Eye relief - 3.15 inches
Tube Diameter - 30 mm
Length with rubber eyecup - 10 inches
Weight 16 ounces
Elevation adjustment on BDC cam for .308, 168gr trajectory from 100m - 1,000m
Intermediate 50m clicks from 300m-1,000m

Blade Tech AR-15 Magazine Pouch - Molle Lok

These new Blade Tech pouches are injection molded. They are made with adjustable tension screws for retention and security so the cumbersome locking flaps are not needed. These pouches are ambidextrous, will work with bullets forward or bullets to the rear. The tension screws will be forward for Left handed users.

Currently available with Molle Lok attachments for quick attachment to a vest, thigh rig or belt.

Blade Tech Inside the Pants Holsters - Glock 9mm / 40SW

This Blade Tech designed IWB concealment holster allows the firearm to remain tight against the body for extra concealment. This holster features 2 loops with pull dot snaps (PDS) that allow the holster to be carried on belts up to 1-3/4" wide. It Also features an adjustable cant and a tension screw for retention adjustment.

This holster will fit the Glock 17 / 19 / 22 / 23 / 24 / 26 / 27 / 31 / 32 / 33 / 34 / 35.

IDPA approved

Features:

Inside the waistband holster made from .093 inch kydex
Handgun is held tight to the body and holster has a protective panel so that a shirt won't interfere with the handgun's safety, etc.
Adjustable tension screws for retention
Adjustable cant
Two loops with pull dot snaps (PDS) allow holster to be carried on belts up to 1 3/4 inches wide.

Nordic Components Benelli M4 Magazine Extensions

Nordic Components - extended magazine tubes for Benelli M4 shotguns

These are the finest machined shotshell tube extensions currently available. Each tube has a unique swirl style barrel nut (image on left) adding a distinctive touch while also providing a quick and sure grip.

Currently available in +2 configuration for the Benelli M4 shotgun. Shell capacity is defined by Nordic as the shell increase above the standard capacity provided by the fixed magazine tube (tube inside the forearm). If your shotgun currently has a short tube extension that extends past the fixed magazine tube, the round capacity of that extension would be lost as it is removed and replaced.

Overall length of the tube extensions : +2 - 6 inches.

An extended spring is included with the magazine extension tube.

Followers, clamp, clamp rail and speed bolt handle in the image below are for display purposes only and are not included with the magazine extension. These items can be purchased separately.

Nordic Components Browning Gold Magazine Extensions

Nordic Components - extended magazine tubes for Browning Gold shotguns

These are the finest machined shotshell tube extensions currently available. Each tube has a unique swirl style barrel nut (image on left) adding a distinctive touch while also providing a quick and sure grip.

Currently available in +3, +4 and +5 configurations for the Browning Gold shotguns. Shell capacity is defined by Nordic as the shell increase above the standard capacity provided by the fixed magazine tube (tube inside the forearm). If your shotgun currently has a short tube extension that extends past the fixed magazine tube, the round capacity of that extension would be lost as it is removed and replaced. Magazine tube length is the length of the tube and nut.

Overall length of the tube extensions (including the nut):
+3 - 8 1/4 inches
+4 - 10 inches
+5 - 11 5/8 inches

Using the tube overall length provided above, please determine the complete installed length of your shotguns fixed tube and the tube extension. Once this is done, it should be apparent that some tubes will extend past the end of your barrel when installed. That is a perfectly viable option for shotgun use, it is your personal choice as to whether tube extends past the barrel. Please decide before you buy as to whether it is acceptable to you for a tube to extend past the barrel.

An extended spring is included with the magazine extension tube.

Followers, clamp, clamp rail and speed bolt handle in the image below are for display purposes only and are not included with the magazine extension. These items can be purchased separately.

Nordic Components Winchester SX2 / SX3 Magazine Extensions

Nordic Components - extended magazine tubes for Winchester SX2 and SX3 shotguns

These are the finest machined shotshell tube extensions currently available. Each tube has a unique swirl style barrel nut (image on left) adding a distinctive touch while also providing a quick and sure grip.

Currently available in +3, +4 and +5 configurations for the Winchester SX2 and SX3 shotguns. Shell capacity is defined by Nordic as the shell increase above the standard capacity provided by the fixed magazine tube (tube inside the forearm). If your shotgun currently has a short tube extension that extends past the fixed magazine tube, the round capacity of that extension would be lost as it is removed and replaced. Magazine tube length is the length of the tube and nut.

Overall length of the tube extensions (including the nut):
+3 - 8 1/4 inches
+4 - 10 inches
+5 - 11 5/8 inches

Using the tube overall length provided above, please determine the complete installed length of your shotguns fixed tube and the tube extension. Once this is done, it should be apparent that some tubes will extend past the end of your barrel when installed. That is a perfectly viable option for shotgun use, it is your personal choice as to whether tube extends past the barrel. Please decide before you buy as to whether it is acceptable to you for a tube to extend past the barrel.

An extended spring is included with the magazine extension tube.

Followers, clamp, clamp rail and speed bolt handle in the image below are for display purposes only and are not included with the magazine extension. These items can be purchased separately.

Magpul 30 rd Maglevel Polymer Magazine (PMAG), Olive Drab

The Polymer Magazine (PMAG) is a lightweight 5.56 NATO, M-16 compatible magazine. The PMAG features a pop-off storage/dust cover that alleviates pressure from the magazine feed lips, allowing for storage of loaded magazines without risk of feed lip creep that often causes malfunction in standard aluminum magazines. PMAG utilizes a resilient stainless steel spring for corrosion resistance.

The MagLevel PMAG features a window with a round count indicator.

Features:

Anti-tilt follower for increased reliability
Storage/dust cover
Stainless steel spring for corrosion resistance
Textured gripping surface.

If you are unclear about the legality of buying high capacity magazines in your city or state, please click here for the current state and local restrictions. It is the buyers responsiblity to be aware and accountable for any purchase which could violate a local or state law.

Hi-Capacity Magazine Policy:
No magazines with a capacity over 10 rounds to CA, HI, NY, Toledo, OH or MA.
No magazines with a capacity over 12-rounds to Chicago Illinois.
No magazines with a capacity over 15 rd. to NJ.
No magazines with a capacity over 20 rd. to MD.
Be sure to check local and state regulations before ordering.

Springfield XD 45 ACP, holster and magazine pouch package

You don't just get the gun, you get the gear too. Gun lock, two magazines and the Springfield firearm that you choose all nicely packed into a hard plastic gun case. The Springfield XD pistols are double action only with a 13 round mag capacity plus one in the chamber. Comes complete with fixed dovetail three dot sights and checkered polymer grips.

The new Springfield Armory XD .45 ACP Package. This package comes with 2 - 13 round magazines, polymer holster, speed loader and polymer double mag pouch.

From the moment you pick it up you won't believe it's a 45 ACP, much less one that holds 14 rounds. Of course a polymer pistol of any caliber that feels this good in your hand could only be one thing: an XD.

This time the Springfield engineers have outdone themselves, defying the laws of physics, adding material where needed, shaving it away where it's not ... cramming 14 rounds of 45 ACP punch into a polymer frame that is not perceptively larger than the one we use for the 9mm and 40 cal. XDs. Finally, it's here ... a 45 ACP XD that is true to the spirit of what the XD is all about ... an ergonomic wonder that is not just a gun that shoots, but a gun designed for YOU to shoot.

This pistol cannot be shipped to CA, MA, NY & DC.

Caliber: 45 ACP

Magazines: 2 13 round stainless steel

Sights: Dovetail front and rear, 3 dot

Frame: black polymer

Length: 7.3 inches

Width: empty - 30 ounces

Part Number: XD9611HCSP06

Speedfeed III Mossberg 500 / 590 Tactical Stock Forearm Set

After more than two years of research, development, and prototyping, SPEEDFEED has produced the best tactical shotgun stock / forearm ever! The pistol grip design now allows true one-hand control. Combined with the in stock magazine, the SPEEDFEED III Tactical Stock is the most versatile stock on the market today. Tthe SPEEDFEED I stock has two magazine tubes (storing a total of four rounds) molded into the stock. Each magazine tube (holding two shells) exits just behind the pistol grip, one on each side of the stock. A steel spring in each tube holds the rounds in the magazine until they're needed and then with a flick of the finger, shells are instantly available for loading. The set includes forend and recoil pad.

Speedfeed Part # 0255 - fits 12 gauge Mossberg 500 / 590 shotguns.

AR-15 Upper Receiver Parts Kit

The DPMS Upper Receiver Parts Kit contains the Forward Assist Assembly, Ejection Cover Assembly and the A2 Rear Sight Assembly.

Charging Handle is not included.

DPMS Carbon Fiber Forearm, Carbine Length

The DPMS Carbon Fiber Free Float Tube is for a carbine length M4 / CAR-15 hanguard system.

This handguard is made of the same material as the Dodge Viper hood. It is very light weight, durable and helps dissipate heat better than a conventional free float tube.

DPMS Carbon Fiber Forearm, Standard Length

The DPMS Carbon Fiber Free Float Tube is for a standard length AR-15 hanguard system.

This handguard is made of the same material as the Dodge Viper hood. It is very light weight, durable and helps dissipate heat better than a conventional free float tube.

DPMS AR-15 Assembled Lower Receiver with M4 Collapsible Stock

DPMS Panther Arms Forged Lower Receiver Assembly

The DPMS Lower Receiver is forged from T6 Aircraft Aluminum Alloy and has a hardcoat anodized finish. Assembled AR-15 lower includes a 6 position collapsible stock and an A2 pistol grip.

Description

Aircraft Aluminum Alloy Tempered to T6 Condition
Hardcoat Anodized per Mil-A-8625
Teflon Coated Black.

Due to Federal firearms regulations, a Form 4473 or transfer to a receiving FFL is required for the purchase of this receiver. If you are unsure of the procedure, please click here for more information.

M4 Collapsible Butt Stock with Extension Tube

Use this enhanced design tele stock to easily convert Your AR-15 or fixed stock CAR-15 Rifle To true M4 or CAR-15 dimensions. This unbreakable, collapsible butt stock instantly makes the AR-15 / M16 lighter, shorter, compact and easier to carry. The sling swivel can be offset to either left or right.

Latch hardware and sling swivel are included. Mounting hardware sold separately. Available in black only.

This kit includes a 6 position commercial dimension extension tube, castle nut and receiver end plate.

S&W M&P Knife, Assisted Opener, Black

Brand new in box - manufacturer direct
Closed length: 4.25"
Blade length: 2.9"
PARTIALLY SERRATED edge stainless TANTO blade with a black Teflon coating
Ambidextrous thumb studs
Assisted opening blade
T6061 aircraft aluminum handles.

S&W SORT Knife, Assisted Opener, Black

Smith and Wesson SORT Knife, Black Aluminum Handle, Black Blade, Combo Edge

Smith & Wesson makes very good knives at very good prices. The S.O.R.T series--Special Operations Rescue Team--features high quality materials, great craftsmanship, and sophisticated designs. This model in particular has excellent fit and finish, and a super fast assisted opening mechanism. The safety protects you from accidentally opening the knife in your pocket.

Features:

Overall Length (inches): 6.13
Blade Length (inches): 2.75
Blade Material: 4034 Steel, Black
Blade Detail: Combo Edge
Handle Material: Aluminum, Black
Lock Style: Liner Lock
Carry System: Pocket Clip
Special Features: Assisted Opener

Streamlight Super Tact - LED Flashlight

The Streamlight Super Tac LED flashlight is an extremely high performance CR123A Lithium battery-powered flashlight. This light features the latest in LED technology for extreme brightness and long range illumination combined with a push button momentary or constant on tail cap switch for one handed operation.

Streamlight introduces a whole new kind of LED. With a brighter, more powerful, blinding light than any LED that has came before. The new Streamlight-engineered reflector with C4 Photonic Crystal technology almost triples the brightness and creates an intense beam that pierces the darkness. So you get the long-run times and indestructibility of an LED with a new level of brightness that leaves other LEDs in the dark.

Specifications:

Bulb:C4 LED 135 Lumens / 30,000 peak beam candlepower
Runtime: up to 3.5 hours
Lens: Unbreakable polycarbonate with scratch-resistant coating. O-ring sealed
Length: 6.62 inches
Weight: 7.1 oz
Length: 6.62 inches
Body Diameter: 0.90 inches
Major Diameter: 2.20 inches
Reflector: Deep-dish parabolic reflector produces a long range targeting beam with optimum peripheral illumination to aid in navigation. Optimized electronics provide regulated intensity.
Limited lifetime warranty
Two 3 Volt CR123A Batteries (included)
Holster included.

Features: IPX7 Rated design. All openings o-ring sealed to resist moisture. Serialized for positive identification. LED Solid State circuitry provides regulated light output throughout battery life. Removable pocket clip. Fits Streamlight 69100 Rail Mount. Operates with remote switches.

Mossberg 500 Tactical Shotgun

Click here for information when ordering a firearm.

Factory New & unfired Mossberg 500 TACTICAL Persuader/Cruiser 6-SHOT pump-action shotgun in 12 ga.

Manufacturer: Mossberg

Model #: Model 500 Tactical Cruiser - 50420

Type: Shotgun

Finish: Matte Black

Stock Drop :1 1/2 inches - Comb and 2 1/8 inches - Heel

Sights: Bead

Barrel Length: 18 1/2 inches

Overall Length: 39 1/2 inches

Weight: 6 3/4 lbs

Chokes: Cylinder Bore

Chamber: 3 inch

Caliber: 12 Gauge

Capacity: (5 + 1 2 3/4 inch shells) (4 + 1 3 inch shells)

Action: Pump Action.

Glock Field Knife, Tan with Saw Blade

Glock's knives are made of a special hardened steel with polymer handles and black anti-corrosive coated blades for maximum durability and ruggedness. Knives come with matching sheaths made of high-impact resistant polymer materials and feature a loop catch, which allows for quick drawing with only one hand. They fit belts up to 2.4 inches (60mm) in width. These knives are used by special forces around the world and are perfectly balanced for throwing. The handle is made of a high-strength polymer (of course) and the backbone of the blade features a wicked saw-style blade that looks like it will cut through just about anything.

Glock Field Knife, Tan

Command Arms Collapsible Butt Stock

NTOA (National Tactical Officers Association) tested and recommended.

Six position AR-15 / M4 Collapsible Butt Stock with rubber non-slip recoil pad and skeletonized design feature a Picatinny rail and storage compartment for 4 CR123 batteries (not included) or other small items. Ambidextrous design is easily achieved by switching the battery compartment lid and Picatinny rail. Two ultrasonically welded metal inserts allow for the addition of optional quick release sling adaptors (PBSS).

Batteries are not included.

Tac Star Side Saddle, Remington - 4 Shell

The patented TacStar Hunter SideSaddle mounts 4 extra rounds on your shotgun in a convenient and accessible location for fast reloading. The Hytrel polymer shell carrier is attached to an aluminum mounting plate that installs directly on the shotgun receiver. All mounting screws are included, no gunsmithing required. Installation is easy, and in most cases requires no alterations to the shotgun. Note: some field grade shotguns may require a modification to the shotguns forend. Shotguns using the TacStar pistol grip forend do not require modification.

This side saddle will fit the Remington 870, 1100 and 1187.

Snap Hook Style Front Sling Adapter

Each Midwest Industries Snap Hook Style Front Sling Adpater is precision CNC-machined for proper fit and fast easy sling hookup. Steel cross-bolt(s) locks the clamping block tight to eliminate slippage. Adapts virtually any sling to any AR-15 configuration. The Snap Hook Stylle Frotn Sling Adapter has a fixed, round, 5/16 inch (7.8mm) ID loop for clip-on, H&K-style or similar quick-release slings

Features:

Constructed of 6061 aluminum, hard coat anodized for a lifetime of service
HK type loop.

Bushmaster Target Rifle, A3 Style

Click here for information when ordering a firearm.

The Bushmaster A3 Target Rifle has become the standard for many military forces and Law Enforcement agencies throughout the world. The rifles light weight, accuracy, high capacity, and ease of maintenance all contribute to its wide global acceptance. Features of this durable semi-automatic rifle include hard chrome lining in both bore and chamber. This chrome lining, was developed because powder residue and copper fouling do not adhere as strongly to chrome as they do to plain barrel steel. Additionally, chromes lubricity increases muzzle velocity, and eases chambering and extraction. These factors can double the effective barrel life if regular maintenance procedures are observed. The barrel incorporates a birdcage style flash suppressor with closed bottom which compensates for muzzle climb and reduces dust signature when firing from the prone position. The barrel, and all critical steel components of the rifle, are manganese phosphate coated for protection against corrosion and rust.

With the A3 Target Rifle, the Carry Handle is removable to allow easy mounting of a wide variety of scopes, red dot or holographic sights, or night vision equipment. The rear sight used in the Removable Carry Handle is range adjustable from 300 to 600 meters (1/2 MOA for both elevation and windage). Iron sight zero is repeatable when the handle is reattached by means of its knurled knobs.

The Upper and Lower Receivers are precision machined from 7075T6 aircraft quality aluminum forgings for maximum strength. The Upper Receiver includes a forward assist device and an integral cartridge case deflector. The Lower Receiver controls include bolt catch assembly; magazine release button, and safety selector with indicator markings on both left and right sides. The ribbed front handguards - molded of polymer thermoset composite - offer increased control and heat dissipation. The pistol grip and buttstock are also molded of thermoset composite, and the buttstock features a storage compartment for small parts or cleaning gear. The Bushmaster A3 Target Rifle is shipped complete with 30 round magazine, safety and operational manual, and carrying sling in a lockable hard case. The Bushmaster A3 Target Rifle also includes a Removable Carry Handle.

Features:
Finish: Black matte
Receiver: Forward Assist Brass Deflector
Sights: A2 Sights on removeable carry handle
Barrel Length: 20 inches [50.8 cm]
Overall Length: 39.5 inches [100.3 cm]
Weight: 8.78 lbs. [3.98 kg]
Muzzlebreak: Flash Suppressor
Packaging: Black Hard Case
Additional Features: 1 inch wide Black Sling, Black Thermaplastic Pistol Grip, Bayonet Lug

Wiley X PT-1 Sunglasses, smoke, clear and light rustlenses, zipper top case included

The Wiley-X PT-1 sunglasses offer virtually unbreakable Triloid nylon frames that will keep you focused on your task. Designed to cut wind and debris, the circular frame design provides ultimate peripheral vision and reduces backlit glare. This is a very popular model among the troops protecting our great nation. Meets ANSI Z87.1-2003 high velocity safety as well as the military's stringent Vo Ballistic Standard, MIL-PRF-31013.

The Wiley X PT-1 offers a virtually unbreakable Triloid nylon frame that allows the user to easily change specific lens tints for various light conditions. The Circular frame design surrounds the frontal lobe, providing incredible peripheral vision and backlit glare reduction. The custom nose pad is constructed from a soft, clear, neoprene rubber compound that can be adjusted to accommodate any size nose bridge and set the level of the frame on the face. The ear tips are made from a rubber compound, designed to grip better as your body temperature rises.

Includes: smoke, clear and light rust lenses and soft side case.

Wiley X AirBorne Sunglasses, gloss black frames with smoke lenses

Wiley-X Airborne Sunglasses are great looking sunglasses with superior protection from debris and wind from every angle. The designer styled Wiley X Airborne literally seal the eyes from outside elements during cycling, hiking, fishing, sailing or chilling.

The Wiley-X Logo stands for quality and Wiley-X Airborne Sun Glasses are designed for a perfect fit and long-lasting comfort. The Wiley-X Climate Control Series features a removable, durable facial cavity seal that locks onto lightweight ANSI certified frames. Excellent for sufferers of dry eye syndrome or anyone who's had LASIK or laser surgery. Wiley-X lenses block 100% of the sun's harmful ultraviolet rays (up to 400 nanometers) and far exceed ANSI Z87.1 safety and ANSI Z80.3 optical standards.

Cactus Tactical is an authorized distributor of genuine Wiley-X Sunglasses, Wiley X Rx Prescription Eyewear and Wiley X Goggles. Our WileyX Airborne Sunglasses are brand new and come with the full Wiley-X Warranty. We have the best deal on Wiley X Goggles & Sunglasses for U.S. Military (NSN) and Wiley X Nascar Sunglasses and Goggles.

Go ahead. Get out. Challenge the world outdoors. Whatever your pursuit, whether you're working hard, playing even harder, or just hanging out, Wiley X Airborne Glasses keep your eyes protected without sacrificing good looks!

Wiley X Airborne Sun Glasses Features:

Facial Cavity Seal
Lightweight Frame
100% UV Protection
Exceeds ANSI Z87.1 Safety Standards
Exceeds ANSI Z80.3 Optical Standards
Recommended to dry eye syndrome sufferers
Recommended after LASIK or laser surgery.

Package Contents:

New Genuine Wiley X Airborne Sunglasses
New Genuine Wiley X Airborne Sunglasses
Original Wiley X sunglass case.

Blackhawk Universal Single Point Sling Adapter

The Blackhawk Universal Sling Adapter has a totally streamlined design, eliminating the ears that stick out of all the other connectors available. The attachment point is perfectly centered, and is designed to make your rifle hang properly for an immediate re-grip when needed.

Completely ambidextrous, no more left or right versions. Interference with your seletor switch / safety operation is completely gone with this new design.

Made of steel right here in the USA. Accepts MASH hooks (preferred), Z/M style clasps, and HK hooks.

Features:

Accepts all styles of sling hooks
Ring is designed to hold weapon flat against body - your rifle will hang naturally at the ready
its all AR / M4 collapsible stocks, including shotgun conversion kits using AR style receiver plates
Solid, all steel construction
100% Made in USA.

DPMS AR-15 Sportical

DPMS Panther Arms 5.56 NATO Sportical

Barrel:

16 inch Lite Contour w/A2 flash hider (birdcage)

4140 chrome-moly steel

6 grooves, right-hand 1x9 twist, button rifled

Chamber:

5.56x45mm

Method of Operation:

Gas operated rotating bolt

Bolt & Carrier:

8620 steel bolt carrier, heat treated and plated per Mil Spec

Phosphated steel bolt, heat treated and plated per Mil Spec

Sights:

None (mounting optics only)

Weight:

Empty - 6.3 lbs.

Length:

Extended: 36 3/8 inches

Collapsed: 32 1/2 inches

Stock:

DPMS Pardus Carbine Stock

Handguards:

GlacierGuards

Oval Carbine Length

Aluminum Delta Ring

Each Rifle comes with 2 - 30 round magazines, 1 Nylon Web Sling, and 1 Cleaning Kit.

The optic displayed in the image is for illustrative purposes only and not included with the DPMS Sportical.

Due to Federal firearms regulations, a Form 4473 or transfer to a receiving FFL is required for the purchase of this receiver. If you are unsure of the procedure, please click here for more information.

DPMS AR-15 Assembled Lower Receiver

DPMS Panther Arms Forged Lower Receiver Assembly

The DPMS Lower Receiver is forged from T6 Aircraft Aluminum Alloy and has a hardcoat anodized finish. Assembled AR-15 lower includes a mil-spec A2 buttstock assembly and an A2 pistol grip.

Description

Aircraft Aluminum Alloy Tempered to T6 Condition
Hardcoat Anodized per Mil-A-8625
Teflon Coated Black.

Command Arms Collapsible Butt Stock, with mag tube

NTOA (National Tactical Officers Association) tested and recommended.

Six position AR-15 / M4 Collapsible Butt Stock with rubber non-slip recoil pad and skeletonized design feature a Picatinny rail and storage compartment for CR123 batteries (4 total) or other small items. Ambidextrous design is easily achieved by switching the battery compartment lid and Picatinny rail. Two ultrasonically welded metal inserts allow for the addition of optional quick release sling adaptors (PBSS).

Includes buffer tube, buffer spring, buffer assembly, castle nut, and collar.

Ruger 10/22 Rifle

Click here for information when ordering a firearm.

Ruger 10/22 rifles are ideally suited for informal target shooting, plinking, small game hunting, and action-shooting events. The benefits of the Ruger 10/22 are many. The standard 10/22 Carbine, virtually unchanged since introduced in 1964, is the most popular .22 rifle of the last 40 years.

Features:

Caliber: .22 LR
Barrel Length: 18 1/2 inches
Stock: Hardwood
Rear Sight: Adjustable
Suggested Retail Price: $ 261.00.

Valdada High Profile Extended Riser

This is the most versatile riser block we make. .500 inch high and including an extended rail allows a wide range of options. This mount also features a see through hole and 4 Stanag mounting holes for the ultimate in mount option.

Laser engraved V-Tac series.

Product Data:

Length 7 7/8 inches
Weight 6.6 ounces.

Valdada Low Profile Extended Riser

This .250 inch riser block extends out over the handguard offering more mounting options for longer optics.

Laser engraved V-Tac series.

Product Data:

Length 7 9/16 inches
Weight 3.2 ounces.

Valdada One Piece Rail Mount

This aluminum base and Stanag ring set is made to NATO specs and is a superb platform to mount any scope. It mounts to any existing picatinny 1913 rail, and you can buy additional ringsets to change scope tube diameters while still utilizing one base.

Currently available with 30 and 35 MM ring sets.

Product Data:

Length 5 inches
Weight 3.2 ounces.

Galati Six Pack Pistol Magazine Pouch

The Six Pack Magazine Pouch from Galati International holds six 45 Auto magazines, Browning Hi-Power magazines or four double stacked magazines. It has double belt loops for attachment to a belt. Separate Velcro closures are on each of the four pockets.

Constructed from PVC Tactical Nylon for superior quality.
Overall Length: 12 1/4 inches x 6 1/4 inches.

100% Guaranteed with a 2 Year Warranty through Galati International.

STRIKE Sniper Gun Rest

STRIKE SNIPER REST

Features:

Provides stability and accuracy as a long-gun shooting platform
Attaches to webbing on packs using two #9 speed clips
Turns any pack into a sniper pack.

Dimensions: 7.5 inches square x 2.5 inches high.

BlackHawk CQC Standard Holster, Matte Finish, H&K USP Compact, RH

The amazing new Blackhawk CQC Holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.

The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon.

Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day.

All BlackHawk CQC Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits.

Features:

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, Springfield XD, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, Sig Sauer P220 / P226, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, Sig Sauer P228 / P229, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, Beretta 92 / 96, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, Glock 19 / 23 / 32, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, Glock 26 / 27 / 33, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, Glock 17 / 22 / 31, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, 1911, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Carbon Fiber Finish, Sig Sauer P228 / P229, RH

The amazing new Blackhawk CQC Carbon Fiber Composite holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.

The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon.

The textured Carbon Fiber Composite is enhanced by a Carbon-Fiber finish appliqué that gives this holster a cutting edge appearance like no other. The design of the holster aids in concealment with its cut-down body and tapered trailing edge.
Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day.

All BlackHawk CQC Carbon Fiber Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits.

Features:

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Carbon Fiber Finish, Sig Sauer P220 / P226, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Carbon Fiber Finish, HK USP Compact, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering